Introduction
Fix Wi-Fi Not Working in Windows 11. If your Wi-Fi is not working in Windows 11, you may experience issues such as being unable to detect networks, frequent disconnections, or having no internet access. This guide provides step-by-step instructions to resolve Wi-Fi connectivity issues effectively.
Restart Your Router and PC (Basic Fix)
- Restart Your Router:
- Unplug your router from the power source.
- Wait for 30 seconds, then plug it back in.
- Restart Your Computer:
- Click Start > Power > Restart.
- Reconnect to your Wi-Fi network and check if it works.
Enable Wi-Fi on Your PC
Ensure your computer’s Wi-Fi is turned on.
- Press Windows + A to open the Action Center.
- Check if the Wi-Fi icon is highlighted.
- If it’s grayed out, click to enable Wi-Fi.
- Make sure Airplane Mode is turned off.
Run Network Troubleshooter
The built-in troubleshooter can automatically detect and fix Wi-Fi issues.
- Press Windows + I to open Settings.
- Navigate to System > Troubleshoot > Other troubleshooters.
- Click Run next to Internet Connections.
- Follow the instructions and apply any suggested fixes.
Reset Network Settings
Resetting network settings can resolve configuration issues.
- Press Windows + I to open Settings.
- Go to Network & internet > Advanced network settings.
- Click Network reset.
- Click the Reset now button.
- Restart your computer and reconnect to Wi-Fi.
Update Network Drivers
Outdated or corrupt drivers can cause Wi-Fi issues.
- Press Windows + X and select Device Manager.
- Expand the Network adapters section.
- Right-click your Wi-Fi adapter (e.g., Intel, Realtek, Qualcomm) and select Update driver.
- Click Search automatically for drivers.
- Restart your PC and try connecting to Wi-Fi again.
Disable & Enable Wi-Fi Adapter
Restarting the Wi-Fi adapter can fix temporary issues.
- Press Windows + X and select Device Manager.
- Expand Network adapters.
- Right-click your Wi-Fi adapter and select Disable device.
- Wait for 10 seconds, then right-click and select Enable device.
- Test your Wi-Fi connection.
Change DNS Settings
Switching to public DNS servers can improve connectivity.
- Press Windows + I to open Settings.
- Go to Network & internet > Wi-Fi > Hardware properties.
- Click Edit under DNS server assignment.
- Select Manual and turn on IPv4.
- Enter the following DNS servers:
- Preferred DNS: 8.8.8.8
- Alternate DNS: 8.8.4.4
- Click Save.
- Restart your PC and check if the Wi-Fi issue is resolved.
Disable Power Saving Mode for Wi-Fi Adapter
Ensuring the adapter is not turned off to save power.
- Press Windows + X and select Device Manager.
- Expand Network adapters.
- Right-click your Wi-Fi adapter and select Properties.
- Go to the Power Management tab.
- Uncheck Allow the computer to turn off this device to save power.
- Click OK and restart your PC.
Reset TCP/IP Stack & Flush DNS Cache
Clearing network settings can fix connectivity issues.
- Press Windows + S and type cmd.
- Right-click on Command Prompt and select Run as administrator.
- Type the following commands, pressing Enter after each:
- netsh int ip reset
- ipconfig /flushdns
- ipconfig /release
- ipconfig /renew
- netsh winsock reset
- Restart your computer and test the connection.
Reinstall Wi-Fi Adapter Driver
Reinstalling the driver can fix corrupted files.
- Press Windows + X and select Device Manager.
- Expand Network adapters.
- Right-click your Wi-Fi adapter and select Uninstall device.
- Click Uninstall to confirm.
- Restart your PC.
- Windows will automatically reinstall the Wi-Fi driver.
- Check if your Wi-Fi is working.
Additional Tips:
- Ensure your router’s firmware is updated.
- Keep your Windows 11 operating system updated.
- Test your Wi-Fi connection on another device to rule out router issues.
Conclusion:
By following these steps, you can effectively resolve Wi-Fi issues in Windows 11. Regularly updating drivers and resetting network settings can help prevent future problems.
Fix Wi-Fi Not Working in Windows 11. Manglastubh By Ankit Akolkar. Search on Google Free Online Courses